ADDINOL Central Europe

Eco Gear 100 M ... 680 M

High-performance gear oils with Surftec® -technology free of silicone for closed industrial gears, roller and sliding bearings at high loads, operating range from -10 °C up to +100 °C or 14 °F up to 212 °F, prevent micro-pitting and pittings, improve running-in behaviour, re-smoothing of defective friction surface areas

specification and approvals for
ECO GEAR 100 M: übertreffen/exceed DIN 51517/3 (CLP); ISO 12925/1 sowie alle technisch relevanten Anforderungen/as well as all technically relevant requirements; Flender-Freigabe/approval
ECO GEAR 150 M: übertreffen/exceed DIN 51517/3 (CLP); ISO 12925/1 sowie alle technisch relevanten Anforderungen/as well as all technically relevant requirements; Flender-Freigabe/approval
ECO GEAR 220 M: übertreffen/exceed DIN 51517/3 (CLP); ISO 12925/1 sowie alle technisch relevanten Anforderungen/as well as all technically relevant requirements; Flender-Freigabe/approval
ECO GEAR 320 M: übertreffen/exceed DIN 51517/3 (CLP); ISO 12925/1 sowie alle technisch relevanten Anforderungen/as well as all technically relevant requirements; Flender-Freigabe/approval
ECO GEAR 460 M: übertreffen/exceed DIN 51517/3 (CLP); ISO 12925/1 sowie alle technisch relevanten Anforderungen/as well as all technically relevant requirements; Flender-Freigabe/approval
ECO GEAR 680 M: übertreffen/exceed DIN 51517/3 (CLP); ISO 12925/1 sowie alle technisch relevanten Anforderungen/as well as all technically relevant requirements; Flender-Freigabe/approval

Eco Gear 220 S ... 460 S

Fully-synthetic high-performance gear oils with Surftec® technology, free of silicone, operating range from -30 °C up to +120 °C/-22 °F up to 248 °F, for mechanically and thermally heavy loaded gears (e.g. wind power plants), prevention of micro-pitting and pittings, clear prolongation of the life-time of machines and lubricant, saving of energy, re-smoothing of defective friction surface areas

specification and approvals for
ECO GEAR 220 S: übertreffen/exceed DIN 51517/3 (CLP HC); ISO 12925/1 sowie alle technisch relevanten Anforderungen/as well as all technically relevant requirements; Flender-Freigabe/approval
ECO GEAR 320 S: übertreffen/exceed DIN 51517/3 (CLP HC); ISO 12925/1 sowie alle technisch relevanten Anforderungen/as well as all technically relevant requirements; Flender-Freigabe/approval
ECO GEAR 460 S: übertreffen/exceed DIN 51517/3 (CLP HC); ISO 12925/1 sowie alle technisch relevanten Anforderungen/as well as all technically relevant requirements; Flender-Freigabe/approval

Eco Gear 68 S-T

Fully-synthetic high-performance gear oil with Surftec®-technology, free of silicone, outstanding flow behaviour at very low temperatures (pour point < -50 °C/-58 °F), performance like Eco Gear S, in particular for cold climates and the application in cold storage depots

specification and approvals for
ECO GEAR 68 ST: übertreffen/exceed DIN 51517/3 (CLP HC); ISO 12925/1 sowie alle technisch relevanten Anforderungen/as well as all technically relevant requirements; Flender-Freigabe/approval

Poly Gear PG 220 ... PG 680

Fully-synthetic oils for the lubrication of bearings and industrial gears, for the application in sliding and roller bearings and heavy loaded industrial gears, particularly suitable for high temperatures, improve ageing stability, wear protection properties, corrosion protection and foam behaviour

specification and approvals for
POLY GEAR PG 220: DIN 51517/3 (CLP); ISO 12925-1 (CKT); ISO VG 220
POLY GEAR PG 680: DIN 51517/3 (CLP); ISO 12925-1 (CKT);ISO VG 680
POLY GEAR PG 460: DIN 51517/3 (CLP); ISO 12925-1 (CKT); ISO VG 460
POLY GEAR PG 320: DIN 51517/3 (CLP); ISO 12925-1 (CKT); ISO VG 320

Gear Oil CLP 10, CLP 68 ... CLP 680

Lubricating oils for the lubrication of closed industrial gear units as well as roller and sliding bearings exposed to normal loads

specification and approvals for
GETRIEBEÖL CLP 150: DIN 51517/3
GETRIEBEÖL CLP 100: DIN 51517/3
GETRIEBEÖL CLP 220: DIN 51517/3
GETRIEBEÖL CLP 320: DIN 51517/3
GETRIEBEÖL CLP 68: DIN 51517/3
GETRIEBEÖL CLP 460: DIN 51517/3
GETRIEBEÖL CLP 680: DIN 51517/3
GETRIEBEÖL CLP 10: DIN 51517/3

Gear Oil CLP 68 S ... CLP 680 S

Mineral oil based lubricating oils with improved wear protection and interfacial properties for closed gears and heavy loaded sliding and roller bearings, particularly suitable for the application in circulating systems in steel and paper industry

specification and approvals for
GETRIEBEÖL CLP 68 S: DIN 51517/3 (CLP); SEB 181226; Flender-Freigabe/approval
GETRIEBEÖL CLP 100 S: DIN 51517/3 (CLP); SEB 181226; Flender-Freigabe/approval
GETRIEBEÖL CLP 150 S: DIN 51517/3 (CLP); SEB 181226; Flender-Freigabe/approval
GETRIEBEÖL CLP 220 S: DIN 51517/3 (CLP); SEB 181226; Flender-Freigabe/approval
GETRIEBEÖL CLP 460 S: DIN 51517/3 (CLP); SEB 181226; Flender-Freigabe/approval
GETRIEBEÖL CLP 680 S: DIN 51517/3 (CLP); SEB 181226; Flender-Freigabe/approval

Gear Oil CKT 68 ... CKT 460

Fully-synthetic gear oils of type CLP based on PAO for closed gears with dip feed and circulation lubrication, for increased demands on high and low temperature behaviour, temperature range -30 °C up to +150 °C or -22 °F up to +302 °F

specification and approvals for
GETRIEBEÖL CKT 68: übertreffen/exceed DIN 51517/3 (CLP)
GETRIEBEÖL CKT 100: übertreffen/exceed DIN 51517/3 (CLP)
GETRIEBEÖL CKT 220: übertreffen/exceed DIN 51517/3 (CLP)
GETRIEBEÖL CKT 320: übertreffen/exceed DIN 51517/3 (CLP)
GETRIEBEÖL CKT 460: übertreffen/exceed DIN 51517/3 (CLP)

ADDINOL Gear oil CLP 150 PM, 220 PM

Mineral oil based lubricants with additives free of zinc and ash especially for paper industry, ideal for high temperatures and wet environment, also for other applications exposed to water and water vapour, excellent demulsibility, high scuffing load capacity, reliable protection against corrosion and wear

specification and approvals for
GEAR OIL CLP 150 PM: DIN 51517/3 (CLP); entspricht/meets: Voith Paper VN 108; Metso PBM; SKF PMO; FAG FE8 Step 4 PMO
GEAR OIL CLP 220 PM: DIN 51517/3 (CLP); entspricht/meets: Voith Paper VN 108; Metso PBM; SKF PMO; FAG FE8 Step 4 PMO

FG Universal 46 ... 100

Synthetic high-performance oils for plants in food industry

specification and approvals for
FG UNIVERSAL 46: ISO VG 46; DIN 51524/2 (HLP); DIN 51524/3 (HVLP); DIN 51517/3 (CLP); DIN 51506 (VDL); gelistet/listed according to NSF H1
FG UNIVERSAL 68: ISO VG 68; DIN 51524/2 (HLP); DIN 51524/3 (HVLP); DIN 51517/3 (CLP); DIN 51506 (VDL); gelistet/listed according to NSF H1
FG UNIVERSAL 100: ISO VG 100; DIN 51524/2 (HLP); DIN 51524/3 (HVLP); DIN 51517/3 (CLP); DIN 51506 (VDL); NSF H1 gelistet/listed according to NSF H1

FG Gear oil 220

Lubricating oil based on mineral white oil for heavy loaded gears in food and feed industry, also suitable for pharmaceutical and cosmetics industry, as circulating oil and for machine lubrication

specification and approvals for
FG GEAR OIL 220: SAE 90; gelistet nach/listed acc. to NSF H1; entspricht/meets FDA 21 CFR 178.3570

Ecoleb 100 FG ... 680 FG

Fully synthetic gear oils for food and feed as well as pharmaceutical and cosmetics industry, for heavy loaded gears and bearings, physiologically harmless

specification and approvals for
ECOLEB 100 FG: erfüllt/fulfils: FDA 21 CFR 178.3570; entspricht/corresponds to DIN 51517/3 (CLP), ISO 3448, gelistet nach/listed acc. to NSF H1
ECOLEB 150 FG: erfüllt/fulfils: FDA 21 CFR 178.3570; entspricht/corresponds to DIN 51517/3 (CLP), ISO 3448, gelistet nach/listed acc. to NSF H1
ECOLEB 220 FG: erfüllt/fulfils: FDA 21 CFR 178.3570; entspricht/corresponds to DIN 51517/3 (CLP), ISO 3448, gelistet nach/listed acc. to NSF H1
ECOLEB 320 FG: erfüllt/fulfils: FDA 21 CFR 178.3570; entspricht/corresponds to DIN 51517/3 (CLP), ISO 3448, gelistet nach/listed acc. to NSF H1
ECOLEB 460 FG: erfüllt/fulfils: FDA 21 CFR 178.3570; entspricht/corresponds to DIN 51517/3 (CLP), ISO 3448, gelistet nach/listed acc. to NSF H1
ECOLEB 680 FG: erfüllt/fulfils: FDA 21 CFR 178.3570; entspricht/corresponds to DIN 51517/3 (CLP), ISO 3448, gelistet nach/listed acc. to NSF H1

System Cleaner 1-33

Cleaning concentrate for lubrication systems (gears and hydraulic systems)

specification and approvals for
SYSTEM CLEANER 1-33: ISO VG 46

a ukončí html kód . */echo"

\n";echo"